Clicker Garage Door Opener Reviews

Problems With Your Clicker Garage Door Opener?

Did you know that a clicker garage door opener can enhance the overall security of your garage as well as your home?

How is this possible?

If you are interested in finding out the answers to these questions and more that you may potentially have, please keep reading as I have put together some helpful tips in order to fix a potential issue as far as a clicker garage door opener is concerned.

A clicker garage door opener communicates with the opener system by different radio frequencies. These frequencies direct the unit to open and close the garage door when needed.

There are tiny switches that are otherwise known as dip switches which are used to adjust the frequency signals used between the two components. In order to make sure that your garage is secure, I suggest that you reconfigure the dip switch settings every few months. This will help prevent potential vandalism from occurring.

First of all, I would like to explain exactly how a clicker garage door opener works. A clicker garage door opener communicates with the base system by transmitting different radio frequencies. These frequencies in turn, direct the garage door to either open or close as needed. Companies have also included the addition of dip switches on each and every clicker garage door that is designed.

What is a dip switch? Well, a dip switch is a small block of plastic that is similar to the size of a dice that has been cut in half. The switches are typically colored red or blue with eight to ten tiny levers that are positioned up or down.

You should have no problems locating the dip switch on the opener system as well as on the clicker garage door opener. It is important to remember that in order to gain access to the dip switch on the remote control unit; you may be required to open the actual unit up. Keep in mind that this is only necessary if you are unable to locate the dip switch within the battery compartment of the clicker garage door opener.

Once you have access to the dip switch, it is important to scramble the switch positions, then rematch them with the switch block of the clicker garage door opener. Don’t place too much emphasis on how the pattern looks as the important factor lies within whether or not it is random.

If you find that you are still having problems getting the clicker garage door opener to work properly, make sure that you double check the dip switch patterns on both the base system as well as the remote unit to ensure that they are the same.

Next quick thing you can check is to make sure that the battery you are using in the clicker garage door opener is in good condition. If after checking the user manual, you still cannot figure out why your clicker garage door opener is not working correctly, I suggest that you directly contact the manufacturer for further assistance.